CYP CPLUS-401V Скачать руководство пользователя страница 4

Страница: 4 / 64

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply. Please keep the

following in mind as you unpack and install this equipment:
•

Always follow basic safety precautions to reduce the risk of fire,

electrical shock and injury to persons.

•

To prevent fire or shock hazard, do not expose the unit to rain, moisture

or install this product near water.

•

Never spill liquid of any kind on or into this product.

•

Never push an object of any kind into this product through any openings

or empty slots in the unit, as you may damage parts inside the unit.

•

Do not attach the power supply cabling to building surfaces.

•

Use only the supplied power supply unit (PSU). Do not use the PSU if it

is damaged.

•

Do not allow anything to rest on the power cabling or allow any weight to

be placed upon it or any person walk on it.

•

To protect the unit from overheating, do not block any vents or openings

in the unit housing that provide ventilation and allow for sufficient space

for air to circulate around the unit.

•

Please completely disconnect the power when the unit is not in use to

avoid wasting electricity.

VERSION HISTORY

REV.

DATE

SUMMARY OF CHANGE

RDV1

2020/05/15

Preliminary release

Содержание CPLUS-401V

































































Результаты поиска

Содержание CPLUS-401V

Отзывы:

Похожие инструкции для CPLUS-401V

Бренды по названию

Популярные бренды

CYP CPLUS-401V, Руководство по эксплуатации

Результаты поиска

Содержание CPLUS-401V

Отзывы:

Похожие инструкции для CPLUS-401V

Бренды по названию

Популярные бренды