CYP CPLUS-401V, Руководство по эксплуатации

Страница: 11 / 64

6
6.3 Remote Control
6.3.1 IR Remote (Unit Control)
This unit’s IR remote provides control over the
unit directly, as well as control over additional
external devices through the assignment of
learned IR commands.
The following buttons, in “Standard” mode
provide direct control over the unit itself.
Switching to “Advanced” mode allows these
buttons to also be used to control external
device functions.
1
POWER button: Press and hold this
button for over 3 seconds to power the unit
on or place it into standby mode.
Note: A short press of this button will send
a user defined IR command to the current
source device.
2
ADV. Button: Pressing this button toggles
the unit between using the “Standard” and
“Advanced” IR remote button definitions.
3
IN 1~4 Buttons: Press any of these
buttons to switch immediately to the corresponding input.
4
AUDIO Buttons
SOURCE Button: Press this button to sequentially switch through the
available audio sources for both analog outputs.
MUTE Button:
Press to toggle between muting and unmuting the analog
audio output.
Note: By default, the mute button only controls the amplified output. This
behavior can be adjusted via RS-232.
VOL+/VOL− Buttons:
Press these buttons to increase or decrease the
amplified analog audio output volume.
Adv.
1 2 3
4 5 6
7 8 9
0
1
3 4
2