CYP CPLUS-401V, Руководство по эксплуатации

Страница: 19 / 64

14
1) Audio Source: Select the audio source type (HDMI or ARC) to route to
the amplified analog output from the dropdown.
Note: If the display connected to the HDMI output does not support ARC,
no audio will be heard when the ARC source is selected.
2) Lip Sync: Allows the correction of lip sync issues by adjusting the audio
delay from 0 to 150ms.
Note: The maximum amount of delay possible depends on the audio
source’s sample rate. The value provided here assumes a 48kHz stereo
source.
3) Amplifier: This unit’s amplified output provides a number of controls to
fine tune the audio performance of connected analog speakers.
„
Mute: Mute or unmute the amplified analog output independent of the
current line out mute setting.
„
Equalizer Setting: Clicking on this button opens up the Equalizer
window which has adjustment sliders at a variety of commonly
adjusted frequencies from 64Hz to 8kHz. Each slider has an
adjustment range of -10 to 10 decibels.
„
Volume: Adjusts the volume of the amplified analog audio output from
0 to 80. Each step is 0.5dB.
„
Left/Right Enhance: Allows increasing the volume of the left and right
amplified audio outputs independently. Each output can be increased
by up to an additional 20dB in 0.5dB steps.
4) Line Out Mute: Mute or unmute the analog headphone jack output. This
setting is independent of the amplified analog output mute setting.