
13
network to have an IP address automatically assigned to it.
“Static” allows the user to manually enter in the IP address, subnet
mask and default gateway values.
(3) Casting Mode:
This section allows for the selection of unicast or
multicast data transmission modes for the unit.
“Unicast” will send the signal from a single unicast-configured
Transmitter to a single unicast-configured Receiver. Both units must
have the same Link Pair ID.
“Multicast” will send the signal from a single multicast-configured
Transmitter to all multicast-configured Receivers on the local
network with the same Link Pair ID as the Transmitter.
6.6.3 Functions
The “Functions” tab allows the user to choose which features are
supported for transmission over TCP/IP. After changing any of these
settings, please press APPLY and then reboot the unit for the new
settings to take effect.
(1) Video Over IP:
This section provides a control to enable or disable
the sending of a video/audio stream to linked Receivers. When
Содержание CH-U330RX
Страница 2: ......
Страница 27: ......
Страница 28: ...CYPRESS TECHNOLOGY CO LTD www cypress com tw ...