CYP CH-U330RX, Руководство по эксплуатации, Страница: 17 / 28

12
6.6.2 Network
The “Network” tab allows the user to change the unit’s Link Pair ID, IP
mode, IP address and Casting Mode. After making changes to the IP
or Casting mode settings the unit must be rebooted for the changes
to take effect.
Note: Rebooting the unit will cause any changes made to the Link Pair
ID to revert to the ID defined by the physical dip switches on the unit.
(1) Link Pair Setup: Adjusting this value allows you to temporarily
change the unit’s Link Pair ID (as set by the physical dip switches).
After clicking on APPLY the unit will attempt to connect to other
units on the local network with matching Link Pair IDs. This new ID
will revert to the ID specified by the physical dip switches if the unit
is rebooted or powered off.
(2) IP Setup: Allows for the selection of IP address assignment method.
After making changes in this section please press APPLY and then
reboot the unit to make the new settings take effect.
“Auto IP” will scan the local network and assign the unit an address
from the 169.254.xxx.xxx address range without the need for a
DHCP server.
“DHCP” will make the unit search for a DHCP server on the local