CYP CH-U330RX, Руководство по эксплуатации, Страница: 13 / 28

8
6.4 Receiver's Rear Panel
ETHERNET VGA OUT
MIC
IN
LINE
OUT
AUDIO
EDID
SELECT
DC 5V
HDMI OUT
1 2 3 4 5 6 7
1
ETHERNET: Connect via a Gigabit Ethernet switch to a compatible
Transmitter to receive data, and to a PC/laptop to control the unit
via WebGUI.
2 HDMI OUT: Connect to HDMI TVs, monitors or amplifiers for digital
video and audio output.
3
EDID SELECT: Selects the source for the EDID data that is passed to
the Transmitter (from HDMI or VGA). Please reboot the unit after
changing this setting.
Note: The EDID source type on the Receiver should match source
type selected on the Transmitter for best compatibility.
4
VGA OUT: Connect to a VGA monitor or display for analog video
output. (VGA or Non-HDCP HDMI sources only)
5
MIC AUDIO IN: Connect to an analog microphone or to the output
of a device such as a CD player or PC. This audio will be sent to
the analog audio output on the connected Transmitter.
Note: Under certain connection scenarios audio will not be sent
back to the Transmitter. Please check the chart at the end of this
manual to verify if audio from this port will be available.
6
LINE AUDIO OUT: Connect to powered speakers or an amplifier for
stereo analog audio output.
7
DC 5V: Plug the 5V DC power adapter into the unit and connect it
to an AC wall outlet for power.