CynkoMet DZIK N-200, Инструкция по использованию и эксплуатации

Страница: 43 / 51

Cynko Met N-200
Page 43
Figure 14. View of rear guard in fastened position on brackets 1 – rear guard;
2 – safety pin; 3 – locking pin II; 4 – guard bracket; 5 – front limiting sheet.
After dismounted the guard from the rear part of the adapter, fasten it
on the brackets on the front wall. Start this process by fastening the guard’s
brackets to the spreader’s front wall using the screws attached. Next, move
the guard towards the wall so that the end of guard (1) can slide freely
between the mini-spreader’s front wall and limiting sheet (6). Pin (4) should
enter the hole found in guard (1). Such relocation of the guard from the
adapter to the front wall's brackets should be secured by inserting safety pin
(2) through locking pin (4).
The mini-spreader is equipped with an interior wall that prevents the
cargo from spilling while driving. The wall is raised and lowered manually.
During loading, the wall should be in closed position, next, prior to spreading