MSR152 Simple Manual 2006/01/27
MSR152 SERIES
Port Powered Manual Insert Magnetic Card Reader
RS232 Interface
Thank you for purchasing the MSR152 series products.
The MSR152 RS232 Port Powered Manual Insert Magnetic Card Reader series is ideal for retail systems,
time keeping systems, security systems and other card reader related systems. The MSR152 series are
designed to offer the user a card reader solution that will complement many applications.
Triple tracks of MSR152 is uniquely designed to read both credit cards and Driver Licenses (AAMVA and
California standard).
FEATURES
Light weight: Approx. 85g
Compact size: 107L*60W*26H (mm)
Low noise
Low power consumption
Allow for reading up to triple tracks of magnetic cards, including credit cards and drivers licenses.
No extra power supply is needed.
AGENCY APPROVAL
Specification for FCC Class B
Specification for CE Class B
Specification for BSMI Class B
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—
Reorient or relocate the receiving antenna.
—
Increase the separation between the equipment and receiver.
—
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—
Consult the dealer or an experienced radio/ TV technician for help.
You are cautioned that any change or modifications to the equipment not expressly approve by the party responsible for
compliance could void your authority to operate such equipment.
WARRANTY
This product is served under one-year warranty to the original purchaser. Within the warranty period, merchandise
found to defective will be repaired or replaced. This warranty applies to the products only under the normal use of the
original purchaser, and in no circumstances covers incidental or consequential damages though consumers’ misuse or
modification of the products.
This product is served under one-year warranty to the original purchaser. Within the warranty period, merchandise
found to be defective would be repaired or replaced. This warranty applies to the products only under the normal use of
the original purchasers, and in no circumstances covers incidental or consequential damages through users’ misuse or
modification of the products.
WARNING
Please to be cautioned that changes or modifications not expressly approved by the party responsible for compliance
could void the authority to operate the equipment.
UDN PM057-S
1
