CynkoMet DZIK N-200, Инструкция по использованию и эксплуатации

Страница: 27 / 51

Cynko Met N-200
Page 27
4.3 Rules of proper use of the spreader.
4.3.1 Preparation before running for the first time.
4.3.1.1 Control of the spreader after delivery
The manufacturer guarantees that the mini-spreader is fully operational
and complete, and has been checked according to quality control procedures
at the plant and is approved for use. However, this does not relieve the user
from the obligation of checking the vehicle after delivery and before first use.
The machine is provided to the user in a complete state.
Before starting work, the operator of the spreader must carry out an
inspection of the technical condition of the spreader and prepare it for the
first run. Please refer to the content of this manual supplied with the
spreader and apply the recommendations contained in it, take a look at the
design and understand the principle of operation of the machine.
NOTE!
NOTE!
Before connecting and before starting the spreader, read this
manual and follow the instructions contained therein.
External visual inspection:

Check the machine's completeness (presence of all guards, etc.).

Check the condition of the anti-corrosion coatings.

Perform a visual inspection of the individual components of the spreader for
mechanical damage resulting inter alia due to improper transport of the
machine (dents, piercing, bending or broken components).

Check the condition of tires of the driving wheels and the air pressure in the
tires.
4.3.1.2 Preparing the spreader for the first connection.
Preparation
 Check for proper tightening of nuts fixing the driving wheels.