CynkoMet DZIK N-200, Инструкция по использованию и эксплуатации

Страница: 31 / 51

Cynko Met N-200
Page 31
NOTE!
NOTE!
Careless and improper use and operation of the spreader, and
non-compliance with the recommendations contained in this
manual poses a threat to the health.
It is forbidden to use the spreader by persons not authorized,
not qualified to drive the machines to which the spreader will be
coupled, including under aged persons and persons under the
influence of alcohol or other drugs.
Failure to observe the rules of safe use poses a threat to the
health and life of the operator and third parties.
4.3.2 Preparation for the spreader’s work.
In preparation for the spreader’s work, the following should be
checked:

The wear of the tires and driving wheels.

Air pressure in the tires.

Tightening the nuts fixing the discs of the driving wheels to wheel hubs and
the condition of other screw connections.

Tightening of nuts fastening the hitching head to the hitch.

Tightening of nuts fastening the hitch to the lower frame (drawbar).
In addition, after combining the machine with the tractor check:

Correctness of hitch operation (locking of hitch).
4.3.3 Loading the spreader.
Loading of the spreader should take place after proper
connection of the mini-spreader to the drawing machine, with the
tractor engine off and key removed from the ignition switch. Loading
should be performed while the spreader is standing on a flat surface,
with an inclination of no more than 8 degrees. Loading should be