CyClone DV160, Инструкция по установке и эксплуатации, Страница: 8 / 30

8 DV160 Installation - English
MOUNTING AND SET-UP
The unit mounting is carried out with the master plate from the delivery set and two air ducts of required length or any of the mounting kits, MK1 DV160 or
MK2 DV160 (special accessories).
The mounting set MK1 DV160 is specially designed for mounting of the unit at general construction stage. It includes two plastic air ducts, 500 mm (19
11/16”) long and two master plates for marking holes on inner and outer wall sides.
The mounting set MK2 DV160 is specially designed for mounting of the unit in a ready-built premise. It includes two plastic air ducts, 500 mm (19 11/16”)
long, a master plate for marking holes and an outer ventilation hood NB DV160 that prevents ingress of foreign objects inside the unit. If the building’s wall
thickness is above 500 mm (19 11/16”) prepare two extra Ø 125 mm (Ø 5”) air ducts of required length.
PAPER MASTER PLATE FOR HOLE MARKING [MM] (INCHES)
drill 2 holes in the wall, 60 mm (2 3/8”)
deep, with a Ø 8 mm (Ø 5/16”) tool.
2 holes for the round Ø 125 mm (Ø 5”)
duct. Fill the gaps between the wall and
the air duct with a mounting foam.
239 (9 7/16")
160 (6 5/16")
503 (19 13/16"
)
89,5 (3 1/2")
160 (6 5/16"
)
UNIT MOUNTING
Drill 2 holes in the wall,
60 mm (2 3/8”) deep,
with a Ø 8 mm (Ø 5/16”)
tool.
2 holes for the round Ø
125 mm (Ø 5”) duct. Fill
the gaps between the
wall and the air duct
with a mounting foam.
The unit is mounted as follows:
1. Fix the master plate from the delivery set on the wall with a sealing
tape on a required level.