2410-41, 2410-42 and 2410-43 FEP Maintenance & Support Guide
1-1
Revision 1.0 Revision, May 2006
CHAPTER 1
PRODUCT OVERVIEW
1.1
INTRODUCTION
The 2410-43, 2410-42 and 2410-41 Front End Processor is a system featuring six Gigabit Ehternet ports
and six Megabit Ethernet ports. The Gigabit ports can operate at 10/100/1000Base-T and the Megabit
ports can operate at 10/100Base-T. The system uses three PowerPC processors spread out between
three identical hot swappable cards. The 2410-43, 2410-42 and 2410-41 is available in AC or DC
versions and features two redundant, hot swappable power supplies. The 2410-43, 2410-42 and 2410-41
system also monitors power supply, fan status and temperature in an effort to detect and provide early
alert to component failures.
The part numbering system for the 600-2410 series of FEPs is as shown in Figure 1-1.
Figure 1-1. FEP Part Numbering
1.2
SPECIFICATIONS
Table 1-1 lists the specifications for the 2410-43, 2410-42 and 2410-41 series Front End Processor.
Cooling air input is on the left side of the unit and the air exhaust is on the right side. Airflow should not
be restricted; a minimum of one inch clearance on each side is required.
600 - 2410 - 4X - _0
Power Supply
A
- Dual AC
D
- Dual DC
Six 1 Gbit ports
Six 100 Mbit ports
