Cyclades AlterPath, Руководство пользователя

Страница: 38 / 418

Introduction
2 AlterPath KVM Installation, Configuration, and Users Guide
Description
The KVM is a 1U rack-mountble device that serves as a single access point
for administering and using servers and other devices through out-of-band
access methods.
The following figure shows the front and back of the KVM.
Figure 1-1: KVM Front and Back
You can use the two PCMCIA card slots in the front for optional v.90 modem
or secondary Ethernet PCMCIA cards.
You use the KVM ports on the left and middle back of the KVM to connect
servers. You can use the AUX port on the right to connect AlterPath PM
IPDUs or an optional external modem. You use the management ports on the
right to connect to the KVM and to its connected devices.
Depending on the model, the KVM comes with either 16 or 32 KVM ports to
connect from 16 to 32 servers with KVM connections.
The KVM can be used to manage power of up to 128 devices when the
devices are plugged into up to 32 daisy-chained AlterPath PM intelligent
power distribution units that are connected to the AUX port on the KVM.
KVM administrators and users who are authorized to access connected
devices can connect locally or remotely from LANs, WANs, or other dial-up
connections through the Ethernet port or through an optional external modem.
For extended local administration, administrators can connect the Cyclades
AlterPath KVM Expander (purchased separately) to the KVM with a CAT5
cable of up to 500 feet in length.