manualshive.com logo in svg

Cyclades AlterPath, Руководство пользователя

Поделиться
Скачать
Cyclades AlterPath Скачать руководство пользователя страница 245

Configuration

AlterPath KVM Installation, Configuration, and Users Guide

211

“Reject with” means that the filter drops the input packet and sends back a 
reply packet according to any of the reject types listed below. 

Using tcp flags and appropriate reject type, the packets are matched with 
the REJECT target. The following options are available:

• icmp-net-unreachable – ICMP network unreachable alias

• icmp-host-unreachable – ICMP host unreachable alias

• icmp-port-unreachable – ICMP port unreachable alias

• icmp-proto-unreachable – ICMP protocol unreachable alias

• icmp-net-prohibited – ICMP network prohibited alias

• icmp-host-prohibited – ICMP host prohibited alias

• echo-reply – Echo reply alias

• tcp-reset – TCP RST packet alias

5.

Click on the OK button when done.

6.

Click on “apply changes.”

VPN

When VPN Connections is selected under Configuration>Network in Expert 
mode, you can configure one or more VPN connections.

Selecting one of the existing VPN connections and clicking the edit button or 
the add button launches a dialog box to prompt for the details of the 
connection. Complete the fields in the dialog box. The RSA keys may be 
entered using the Copy and Paste feature of your Browser. 

A VPN, or Virtual Private Network lets the KVM and a whole network 
communicate securely when the only connection between them is over a third 
network which is untrustable. A gateway must exist on the remote network 
that is capable of encrypting packets going to the KVM and decrypting 
packets from the KVM. This creates a security tunnel between the KVM and 
the gateway. The gateway machine and the KVM encrypt packets entering the 
untrusted net and decrypt packets leaving it, creating a secure tunnel through 
it. 

Often it may be useful to have explicitly configured IPsec tunnels between the 
KVM and a gateway of an office with a fixed IP address (in this case every 
machine on the office network would have a secure connection with the 
KVM), or between the KVM and the KVM administrator machine, which 
must, in this case, have a fixed IP address. You can add this connection 

Содержание AlterPath



































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды