Cyclades AlterPath Скачать руководство пользователя страница 236

Страница: 236 / 418

Web Manager for Administrators

202

AlterPath KVM Installation, Configuration, and Users Guide

To Add a Chain [Expert]

Go to Configuration>Network >Firewall Configuration in Expert Mode.

The IP Filtering form appears.

2. Click “Add.”

The “Add Chain” dialog box appears.

3. Enter the name of the chain to be added in the “Name” field and then click

OK.

Spaces are not allowed in the chain name.

The name of the new chain appears in the list.

4. Finish defining the chain by adding one or more rules, as described in to

“To Add a Rule” on page 245.

To Edit a Chain [Expert]

Perform this procedure if you want to change the policy for a default chain.

Note:User-defined chains cannot be edited.

Go to Configuration>Network >Firewall Configuration in Expert Mode.

2. Select one of the default chains from Chain list, and then click the “Edit”

button.

If you select a user-defined chain, the following dialog box appears.

Содержание AlterPath



































































































































































































































































































































































































































Результаты поиска

Содержание AlterPath

Отзывы:

Бренды по названию

Популярные бренды

Cyclades AlterPath, Руководство пользователя

Результаты поиска

Содержание AlterPath

Отзывы:

Бренды по названию

Популярные бренды