Cyclades AlterPath Скачать руководство пользователя страница 62

Страница: 62 / 418

Introduction

AlterPath KVM Installation, Configuration, and Users Guide

Decision 2: Check Group’s KVM Port Permissions

2. Is the user included in a group with KVM port permissions that allow or

deny access to the port?

• If yes, access is allowed or denied.

• If no, skip to Decision 3.

Note:

When a user is in more than one group, the most restrictive permission is
used.

Example for Decision 2

• If user jim is trying to access port 4 and he is a member of a group called

linux_ca2 that has port 4 in a list of ports with read/write permissions,
then jim is given read/write access.

• If user joan is trying to access port 4 and she is in a group called

linux_ca3 that has port 4 in a list of ports with no permission, then joan is
denied access.

• If jerry and jill are trying to access port 4 and are in a group called

linux_ca4 that has no specific port permissions defined, then their access
requests are passed to decision 3.

• If joe, jennifer, jordan, jolanda, and jezebel are trying to access port 4 and

are not in any group, then their access requests are passed to decision 3.

Decision 3: Check Generic User’s KVM Port Permissions

3. Does the Generic User have specific KVM port permissions that allow or

deny access the port?

• If yes, access is allowed or denied.

• If no, go to decision 4.

Example for Decision 3

• If user jerry is trying to access port 4 and the Generic User has port 4 in a

list of ports with full access permissions, then jerry is given read writer
and power management access.

• If user jill is trying to access port 4 and the Generic User has port 4 in a

list of ports with no access permissions, then jill is denied access.

Содержание AlterPath



































































































































































































































































































































































































































Результаты поиска

Содержание AlterPath

Отзывы:

Бренды по названию

Популярные бренды

Cyclades AlterPath, Руководство пользователя

Результаты поиска

Содержание AlterPath

Отзывы:

Бренды по названию

Популярные бренды