Cyclades alterpath pm10, Инструкция по установке, администрированию и эксплуатации, Страница: 85 / 140

Command Line Interface 65
Commands
interval
Configures the power up interval for each outlet in the system. The power up
interval of an outlet is the time the unit will wait, after turning this outlet on, to
turn on any other outlet.
Syntax
interval <outlet number> <duration>
Arguments
<duration>
Sets the power up interval of outlets.
Default value is 0.5.
<outlet number>
Outlet number, such as “5”, outlet name such as
“sunfire”, or group of outlets such as “1, 3-5”
Examples
To display the interval, type:
To set the interval, type:
pm> interval 1
pm> interval 2, 4-6 2.4
2: Outlet cycle interval set to 2.40.
4: Outlet cycle interval set to 2.40.
5: Outlet cycle interval set to 2.40.
6: Outlet cycle interval set to 2.40.