Cyclades alterpath pm10 Скачать руководство пользователя страница 52

Страница: 52 / 140

Plugging Devices Into AlterPath PM Outlets

AlterPath PM Installation, Administration, and User’s Guide

Plugging Devices Into AlterPath PM Outlets

In order to control power on a device, the device must be plugged into at least
one of the AlterPath PM’s power outlets.

To Plug Devices Into AlterPath PM Outlets

Connect a device’s power cable to one of the AlterPath PM's outlets.

Repeat step one until all of the AlterPath PM’s power outlets are used.

Powering On the AlterPath PM

Power on the AlterPath PM in order to begin managing power of its connected
devices.

To Power On the AlterPath PM

• Plug the power cable into an adjacent AC power source.

Important:

The AlterPath PM must be powered by a receptacle with adequate circuit
protection.

Содержание alterpath pm10













































































































































Результаты поиска

Содержание alterpath pm10

Отзывы:

Cyclades alterpath pm10, Инструкция по установке, администрированию и эксплуатации, Страница: 52 / 140

Результаты поиска

Содержание alterpath pm10

Отзывы: