Cyclades alterpath pm10, Инструкция по установке, администрированию и эксплуатации, Страница: 65 / 140

Configuration 45
Upgrading the AlterPath PM Firmware
4. Use your terminal emulator program to upload the AlterPath PM
firmware file to the AlterPath PM using the Xmodem protocol.
If you are using HyperTerminal in Windows, do the following procedure:
a. From the top menu select Transer>Send.
The Send File popup window appears.
b. Click the Browse button to set the proper path for the AlterPath PM
firmware file located on your work station.
Note: You must browse for the proper file and click the Send button within 10
seconds of selecting Transer>Send. If you fail to do so, an error message will
appear and the transmission will fail. You will then be given another 10-
second window in which to repeat steps b. through d.
c. Select Xmodem as the protocol.
d. Click on the Send button.
If you are using Minicom in Linux, do the following procedure:
a. From the main screen, press Ctrl A + S (for sending files).
The Upload popup window appears.