41
CALL WAITING ID OPTIONS (CALL WAITING ID DELUXE)
If you have subscribed the ‘Call Waiting’ and ‘Call Waiting ID Deluxe’ from your local
telephone company, you will hear a Call Waiting tone when a new call comes in during a
call. You can either swap between the two calls or dispose the incoming call.
Call Waiting ID Option Set to OFF
(see page 26)
If there is an incoming call during an ongoing call, the
Caller ID information for the Call Waiting party appears
on the LCD. Press [Flash] key to answer the Call Waiting
party and put the first call on hold.
You can use [Flash] key to switch between the two calls.
Call Waiting ID Option Set to ON
(see page 26)
If there is an incoming call during an ongoing call, all the
five softkey option labels for Call Waiting ID Deluxe
features will be automatically shown on the LCD.
When you hear the Call Waiting tone, press the
corresponding softkey to apply a disposition to the
incoming call.
Note:
You must dispose the incoming call within 26 seconds after the Call Waiting tone. The
following options are available.
[JOIN]
:
To add the waiting call to your first call.
[DROP ANS]
: To hang up the first call and answer the waiting call.
[HOLD]
:
To put the waiting call on hold and send a hold announcement.
[SAY BUSY]
: To play a pre-recorded message from your telephone company that the
line is busy and terminate the waiting call.
[SEND V.M.]
: To forward the waiting call to your voice mail or answering service.
Tip: Call Waiting ID Options may not be available in all areas. Contact your local
telephone company for details.
JOHN SMITH
123-123-4568
10:08 01/18 X1
EXIT
TALK VOL-2
HOLD
SERVICE DIR. DIAL V.M.
JOHN SMITH
123-123-4568
10:08 01/18 X1
JOIN DROP ANS HOLD SAY BUSY SEND V.M.
0:00:30 VOL-2
HOLD
3WAY
SERVICE DIR
C A L L E R I D O P E R AT I O N
