30
Pre-dialing
Pre-dialing allows you to key in the phone number and verify it before dialing.
Key in the phone number in stand-by mode.
To edit the number on LCD, press [DELETE] softkey to
clear the last digit. To clear the entire number, press
[EXIT] softkey. Then re-enter the correct digits.
Press [Talk] or [Spk.] key on the handset or [
;
] key on the
base unit to dial the number. The call timer will start
counting.
Press [OFF] key on the handset or [
;
] on the base unit to
hang up your call.
ANSWERING A CALL
On the Handset
Press [Talk] or [Spk.] key to answer the incoming call. If
the phone is already set to Auto Answer Mode
and the
handset is on the charging cradle, you can answer the
call by simply lifting the handset off the base unit or the
charging cradle, without pressing any key.
To hang up the call, press [OFF] key.
From the Base Unit
Press the [
;
] key to answer. To hang up the call, press [
;
] again.
REDIALING A CALL
Direct Redialing Last Dialed Number
Press [Talk] or [Spk.] key on the handset or [
;
] key on the
base unit and listen for the dial tone.
Press [Redial] key to dial the last dialed number.
123456
█
O.K. EXIT DELETE
SAVE
1234567
0:01:35 VOL-2
HOLD
3WAY
SERVICE DIR. DIAL V.M.
0:01:35 VOL-2
HOLD
3WAY
SERVICE DIR. DIAL V.M
TALK VOL-2
HOLD
SERVICE DIR. DIAL V.M.
1234567
0:00:02 VOL-2
HOLD
3WAY
SERVICE DIR. DIAL V.M
B A S I C O P E R AT I O N
