37
CONFERENCE CALL
Your new cordless system supports conference calls up to 5 parties:
•
1 handset and 2 external calls (3-way calling);
•
3 handsets, the base unit and 1 external call;
(For detailed instructions involving 2 handsets, please refer to the ‘MULTI-HANDSET
OPERATION’ section.)
3-WAY CALLING
While on a call, press [3WAY] softkey to access 3-Way
Calling service. The system will dial a long FLASH to put
the initial call on hold and obtain a new dial tone to make
a second call.
Key in the phone number of the second party. After the
private conversation with the second caller, press [3WAY]
softkey to add the first caller into the conference call.
Note: When the handset is engaged in a 3-way conference call, press the [Talk] key on
another handset or [
;
] key on the base unit to join the conference call. 3-way calling may
require subscription from your telephone company or may be available on a charged
per-use basis.
ROOM MONITORING
The phone can be used as a room / baby monitor. Leave one handset or the base unit in
the room to be monitored and you can listen to that room from another handset. This lets
you keep an “ear” on the room while staying / working in another room.
On the handset / Base unit in the room to be monitored:
(E.g. on the handset):
Press [MENU] softkey
Use [
▼
] / [
▲
] to select “MONITOR ROOM” and press
[O.K.].
Then the handset will display “READY TO ROOM
MONITORING”.
On the handset / Base unit used for monitoring:
Press [Int.] key.
Use [
▼
] / [
▲
] to select the handset or base unit where
the room is to be monitored and press [O.K.] to start.
The link is automatically set up so the communication is
one-way only.
To end the monitoring, press [EXIT] on either unit.
TALK VOL-2
HOLD
SERVICE DIR. DIAL V.M.
1234567
0:00:30 VOL-2
HOLD
3WAY
SERVICE DIR. DIAL V.M
HS (1)
READY TO
ROOM MONITORING
EXIT
MONITORING
HS (1)
VOL -2
EXIT
A D VA N C E D O P E R AT I O N
