35
When the call is on hold, “CALL ON HOLD” appears on
all handset and the base unit LCD.
Press [HOLD] key again or [Talk] key to release.
Note: The call can be picked up by the base unit or any handset registered to the same
base unit by pressing [
;
] or [Talk] key.
SENDING TONE SIGNALS IN PULSE DIALING MODE
If your telephone line uses pulse dialing (such as for a rotary dial phone), you can
temporarily override the Pulse Mode setting with the Tone Mode until the unit goes back
on-hook. This may be necessary for accessing certain special services such as
bank-by-phone service:
1. Use pulse dialing to call the service.
2. When the service answers, press [
½
].
3. Follow the normal procedure of the special service you are using. Any additional
numbers you dial are sent as tone signals.
4. When you hang up, the telephone returns to pulse mode.
DIAL VOICE MAIL
If you have subscribed to the Voice Mail and Message Waiting Indicator services, you
can access your voice mail system by pressing [DIAL V.M.] softkey. To use this feature,
you must first program your voicemail access number into the handset and base unit.
Programming your own Voicemail access number
Press the [DIAL V.M.] softkey.
Press the [SAVE] softkey to enter your access number.
If you make a mistake, press [DELETE] to erase the last
digit and re-enter.
Press [SAVE] to confirm your programming.
Then you are ready to use the [Dial V. M.] softkey.
CALL ON HOLD
HOLD
DIAL VOICE MAIL
USE SAVE = +NEW
EXIT
SAVE
DIAL VOICE MAIL
123
╴
USE SAVE = DONE
EXIT DELETE
SAVE
A D VA N C E D O P E R AT I O N
