8
Your new telephone includes the highest quality NiMH (Nickel Metal Hydride)
rechargeable batteries. Following the simple instructions below can significantly
improve your batteries operational results.
Connecting the Base Unit
1.
Plug one end of the telephone line cord into the ‘TEL. LINE’ jack at the
bottom of the base unit and plug the other end of the cord into a modular
telephone wall jack. (If your wall jack is not modular, contact your local
telephone company for assistance
).
2.
Plug the supplied DC adapter’s barrel plug into the ‘DC 7.5V’ jack at the
bottom of base unit and the other end into a standard 120V AC wall outlet.
Charging the Batteries
1.
Press the release point on the back cover of the handset and slide
downwards to open the battery compartment.
2.
Insert the supplied two batteries into the compartment according to polarity
marks (+).
3.
Slide the back cover upwards until it snaps into place.
4.
Place the handset on the base unit and make sure the Charge Indicator on
the base unit illuminates, which indicates that it has begun charging. The
battery icon on the handset LCD will change from the mode of ‘very low’, to
‘low’, to ‘medium’, to ‘full’ and repeat as a cycle.
5.
Leave the handset on the base unit and make sure the batteries are charged
for at least 15 hours prior to initial use!
INSTALLATION
TELEPHONE WALL JACK
AC WALL OUTLET
