36
Locate Misplaced Handset(s) with Base Unit
To locate the handset(s) while not on the base unit, press [Page] key on the base
unit. Then the handset(s) in range will display ‘PAGING FROM BASE’ and emit an
alert signal that is different from exterior-line (fixed line) calls.
To stop the paging, press [Page] on the base unit again or press any key on the
handset. If no handset answers, the paging will stop automatically after 1 minute.
Note: 1.The handset being paged will ring even if the ringer has been set to ‘OFF’.
2. If two handsets are engaging in an intercom talk, then both handsets can
only hear one beep instead of alert.
Intercom between Handsets
Press [Int.] key on a handset in standby
mode.
Then the screen will show all the other
available handsets in range of the base
unit. (‘HS’ is for ‘handset’)
Use
▲
/
▼
to scroll to the handset you
want to intercom with and press [CALL].
For instance, if HS (2) is being paged by
HS (1), HS (1) will display ‘PAGING HS
(2)’.
HS (2) will ring and display ‘PAGING
FROM HS (1)’.
Press [Int.] key,
or [OK] softkey on
HS (2) to answer the intercom call.
If HS (2) does not want to answer, press
[EXIT] softkey, then the ring will stop.
HS
2
↓
HS
3
CALL
EXIT
PAGING
HS
(2)
EXIT
PAGING
FROM
HS
(1)
OK
EXIT
INTC
00
:
00
:
01
MUTE
EXIT
PAGING AND INTERCOM
