35
Locate Misplaced Handset(s) with Base Unit
To locate the handset(s) while not on the base unit, press the [Page] key on the
base unit. Then the handset(s) in range will display ‘PAGING FROM BASE’ and
emit an alert signal that is different from the external line (outside land line) calls.
No response from the handset(s) if it is battery power failure or turned to Power
OFF.
To stop the paging, press [Page] on the base again or press any key on the
handset. If no handset answers, the paging will stop automatically after 1 minute.
Note: 1.The handset being paged will ring even if the ringer has been set to ‘OFF’.
Intercom between Handsets
(in this case an expandable handset is
required)
Press the [Int.] key on a handset in
standby mode.
Then the screen will show all the other
available handsets in range of the base
unit. (‘HS’ is for ‘handset’).
Use
▲
/
▼
to scroll to the handset you
want to intercom with and press [CALL].
For instance, if HS (2) is being paged by
HS (1), HS (1) will display ‘PAGING HS
(2)’.
HS (2) will ring and display ‘PAGING
FROM HS (1)’.
Press the [Int.] key,
or the [OK]
softkey on HS (2) to answer the intercom
call.
If HS (2) does not want to answer, press
HS
2
↓
HS
3
CALL
EXIT
PAGING
HS
(2)
EXIT
PAGING
FROM
HS
(1)
OK
EXIT
INTC
00 : 00 : 0
MUTE
EXIT
PAGING AND INTERCOM
