2 4
For RS/6000 Systems using standard VGA video
1.
If your RS/6000 system utilizes standard VGA video, refer to the
previous section, “Attaching a PC Computer” and follow the instruc-
tions for configuring and installing your XPAC/XPAB modules, and
connecting computer interface cables for IBM PS/2 style computers.
For RS/6000 Systems using 13W3 video
1.
If your RS/6000 system has a 13W3 video connector, refer to the
previous section, “Attaching a PC Computer” and follow the instruc-
tions for configuring and installing your XPAC/XPAB modules.
2.
In order to connect the computer interface cables, you will need a
VAD-21 adaptor from Cybex. If you do not have this adaptor, contact
our Sales Department to order one.
3.
Follow the instructions for connecting computer interface cables for
IBM PS/2 style computers making sure to attach the VAD-15 between
the VGA video connector on your computer interface cables and your
RS/6000 workstation.
For RS/6000 Systems using 3C3 video
1.
If your RS/6000 system has a 3C3 video connector, refer to the previ-
ous section, ‘Attaching a PC Computer ’ and follow the instructions for
configuring and installing your XPAC/XPAB modules.
2.
Set the DIP switch on your XPAC/XPAB module as shown below:
3.
In order to connect the computer interface cables, you will need a
VAD-18 adaptor from Cybex. If you do not have this adaptor, contact
our Sales Department to order one.
Attaching an
IBM RS/6000
Workstation
13W3 VIDEO CONNECTOR
3C3 VIDEO CONNECTOR
Switch 1
Switch 2
Switch 3
Off
Off
Off
Normal video. Use with monitors that
support sync on green.
Off
Off
On
Use sync on green to generate horizontal
and vertical sync
Function