CYBEX autoview 200, Инструкция по установке и эксплуатации

Страница: 17 / 48

Basic Operations
3
Overview
Your AutoView 200 may be operated in a non secure (no password required)
or secure (password required) mode. All units ship defaulted to the non-
secure mode. For information on implementing password security, see the
“Administrator Functions” section of chapter 4.
PCs may be powered-up one-at-a-time or all at once. No operator
intervention is required during booting. As the system stabilizes, the
green LED over each channel will light, indicating that the attached
computer is powered on. A PC may now be selected via the on-screen
display menu or, if you are in non-secure mode, channel push-buttons, the
Scan button or keyboard hot-key sequence. The amber LED will light at the
active computer.
The Scan push-button has one LED over it. Press the button momentarily
to switch to the next computer in sequence. The LED will turn amber
briefly during the channel switch. Press and hold the button for one
second to initiate channel scanning. The LED will turn green while you are
in scan mode.
There is one status LED. The LED lights red if an internal failure occurs.
The LED will blink green for several seconds during power-up while the
system performs a self-diagnostic. After initialization, the LED remains
green during normal operation and blinks only when you are in
Command Mode.
status a b c d e f g h scan
A
UTO
V
IEW
200
11