CYBEX autoview 200, Инструкция по установке и эксплуатации

Страница: 27 / 48

21
Setting the ID Window Dwell Time
This menu selection lets you set the time that the ID Window remains on
screen after a channel switch. Each channel can be configured
independently. The default time is set for five seconds.
1. Highlight the channel you wish to change in the main OSD Window.
2. From the main OSD Window, press the
Control
key twice to access the
Administrator Command Menu.
3. Select ‘Edit Channel’ from the Command Menu.
4. Choose the option ‘ID Dwell Time’.
5. Enter a number between 0-255 seconds. Entering 0 disables the ID
Window. Entering
255
allows the ID Window to stay on screen the
entire time the channel is active.
4. Press
Enter
to accept the changes or press
Esc
to exit the menu
without saving the changes.
On-Screen Display Operations