CYBEX autoview 200, Инструкция по установке и эксплуатации

Страница: 28 / 48

AutoView 200 Installer/User Guide
22
The Administrator Functions Menu is accessed from the Administrator
Commands Menu. Here, you can setup the administrator and user accounts,
enable and disable the setup port and utilize the AutoView 200’s FLASH
upgrade feature.
Differences between Secure and Non-Secure Operating Modes
Administrator Account
Setting up an administrator account with a password places your system
in secure mode. Non-secure systems do not use passwords. To return your
system to the default of non-secure mode, simply delete the administrator
password. When the administrator password is enabled, user passwords
must also be entered or the switch will not be completely secure. The
default for users is no password. Simply press
Enter
at the prompt.
If you configure an administrator password from this menu, your system
will then be in secure mode. A lock symbol will appear to the right of the
menu headings to indicate secure operation.
Logout Capability
You have the option of automatically logging out of the system after an
administrator defined period of inactivity. Timeout values can be set from 0
to 60 minutes. (Default is five minutes). A value of 0 keeps the user logged
in continuously. When the timeout is reached, the current channel is
deselected and the display goes to the login prompt. Users must login again
to access system computers. This option is only available in secure mode.
Multiple User Logins
You can create up to four user logins in addition to the system
administrator. Use these logins to configure and control server access for
every type of system user. The administrator has full access privileges;
additional users can have viewing or viewing with keyboard and mouse
control capability for each attached server. This option is only available in
secure mode.
Administrator
Functions