CYBEX 515T, Руководство пользователя

Страница: 97 / 104

Cybex Sport+ Treadmill Owner’s and Service Manual
3. Remove the display overlay.
A. While wearing an ESD strap, disconnect the switch membranes (two upper and one
lower) from the display board. See Figure 19.
B. Use a razor blade to peel up a corner of the display overlay and pull off the overlay.
4. Attach the display overlay.
A. Remove the paper backing from the new display overlay.
B. Slide the ribbon cable through the (upper two or lower one) slot.
C. Carefully place the display overlay in position within the indentation on the console
front and firmly rub the display overlay so that it adheres to the console.
D. Route the ribbon cables under the frame tubes and connect them to the display
board.
5. Secure the console covers.
A. Using a Phillips head screwdriver, tighten the six screws that hold the console front
to the frame.
B. While being sure not to pinch any cables, secure the console back to the console
with the five Phillips head screws.
6. Test the new display overlay.
A. Turn the main power switch to the on (I) position.
B. Plug the treadmill into the power outlet.
C. Try each key to be sure that it functions properly.
Service
Page 7-39