manualshive.com logo in svg

CYBEX 515T, Руководство пользователя

Поделиться
Скачать
CYBEX 515T Скачать руководство пользователя страница 35

4 - Preventive Maintenance

Warnings/Cautions

All warnings and cautions listed in this chapter are as follows:

! WARNING: All maintenance activities shall be performed by qualified personnel.

Failure to do so could result in serious injury.

! WARNING: To prevent electrical shock, be sure that power is shut off and the

treadmill is unplugged from the electrical outlet before performing any
cleaning or maintenance procedures.

! WARNING: Keep wet items away from inside parts of the treadmill. Electrical shock

could occur even if the treadmill is unplugged. Do not touch components
on the lower board. A charge can remain after unplugging the power cord
and turning off the treadmill. 

! CAUTION: Be careful not to over tighten the belt. Over tightening the belt can cause

the belt to stretch and require replacement.

Regular Maintenance Activities

! WARNING: All maintenance activities shall be performed by qualified personnel.

Failure to do so could result in serious injury.

Preventive maintenance activities must be performed to maintain normal operation of your
treadmill. Keeping a log sheet of all maintenance actions will assist you in staying current with
all preventive maintenance activities. See 

Service Schedule 

and 

Log Sheet

located at the end

of this chapter. 

NOTE:

Worn or damaged components shall be replaced immediately or the treadmill removed
from service until the repair is made.

NOTE:

Cybex is not responsible for performing regular inspection and maintenance actions
for your treadmill. Instruct all personnel in equipment inspection and maintenance
actions and also in accident reporting/recording. Contact Cybex Customer Service at
800-766-3211 or 508-533-4300 for any preventive maintenance or service concerns.

Cleaning Your Treadmill

When cleaning your treadmill spray a mild cleaning agent, such as a water and dishsoap
solution, on a clean cloth first and then wipe the treadmill with the damp cloth.

Cybex Sport+ Treadmill Owner’s and Service Manual

Preventive 

Maintenance

Page 4-1

Содержание 515T









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды