manualshive.com logo in svg

CYBEX 515T, Руководство пользователя

Поделиться
Скачать
CYBEX 515T Скачать руководство пользователя страница 3

Cybex Sport+ (515T) Treadmill

Owner’s and Service Manual

Cardiovascular Systems

Part Number LT-18115-4 Rev B

Cybex and the Cybex logo are registered trademarks of Cybex International, Inc.  Safety Sentry™ is a registered trademark of Cybex
international, Inc.  Polar is a registered trademark of Polar. 

DISCLAIMER:

Cybex International, Inc. makes no representations or warranties regarding the contents of this manual. We reserve

the right to revise this document at any time or to make changes to the product described within it without notice or obligation to
notify any person of such revisions or changes.

© 2003 - 2006, Cybex International, Inc. All rights reserved. Printed in United States of America.

10 Trotter Drive Medway, MA 02053 • 800-766-3211 • 508-533-4300 • FAX 508-533-5183 
www.cybexinternational.com • [email protected] • [email protected] • LT-18115-4 • Rev B • April 2006

Содержание 515T









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды