CYBEX 515T, Руководство пользователя

Страница: 25 / 104

your workout and add to the time you already accumulated. If the Quick Start key has not
been pressed during the 20 second pause, workout data will be cleared and the display will
change to
Dormant Mode .
Press Stop a second time to interrupt workout data from cycling and to change the display to
Dormant Mode .
The function of the immobilization method: The purpose
of immobilizing the treadmill is to prevent unauthorized use.
This can be accomplished by removing the e-stop key from
the console, unclipping it from the cord and putting it in a
non-accessible place. See Figure 2.
The emergency dismount: Follow the steps listed below if
you experience pain, feel faint or need to stop your treadmill
in an emergency situation:
1. Grip handrails for support.
2. Step onto the top steps.
3. Pull the e-stop key off the console.
The function of the emergency stop: The e-stop key functions
as the emergency stop. In an emergency situation, remove the e-
stop key from the console and the treadmill will come to a stop.
On the console, the e-stop location looks like Figure 3.
Safety Sentry
If you step off your treadmill during a workout, it may detect that you are not there. After the
pre-selected waiting period “run?” will appear on the center window for a few seconds then
Safety Sentry™ will stop the belt. If you press
Quick Start within the time selected you can
resume your workout. NOTE: If you are less than 100 lbs. Safety Sentry may not detect you
are there and cause the treadmill to come to a stop. Safety Sentry is disabled above 11%
grade.
Control During Operation
Control keys on the display are usable during operation and may be pressed at any time to
make adjustments in speed, elevation or data readouts.
Cybex Sport+ Treadmill Owner’s and Service Manual
e-stop
+
-
Figure 3
Figure 2
Operation
Page 3-5