manualshive.com logo in svg

CYBEX 515T, Руководство пользователя

Поделиться
Скачать
CYBEX 515T Скачать руководство пользователя страница 22

Quick Operation Guide

NOTE: 

Maximum user weight is 400 lbs. (181 kg).

The following is a quick overview of the operation of the treadmill. For more information read

Detailed Operation Guide

in this chapter. 

1.

Place your feet on the two top steps located on each side of the running belt.

! CAUTION: Do not stand on the running belt when starting the treadmill. Always place

your feet on the two top steps when beginning a workout.

2.

Clip the e-stop clip onto your clothing and test it as described under 

Emergency Stop

in

the 

Safety

chapter.

3.

Press any program key or press 

Quick Start

to skip the settings and begin 

Manual Mode

immediately. 

4.

If you pressed a program key to select a program, you will now be prompted for workout

Weight 

and 

Level

as appropriate. Adjust these settings with the 

LM

arrows and press

Enter

to proceed.

5.

The treadmill begins a countdown, “3...2...1,” after which it accelerates the belt to 

1.0 mph (1.0 kph) (for 

Manual Mode

) or the speed of the program that you selected.

6.

Hold the handrails while you step onto the running belt and begin walking.

7.

Press the 

Speed 

+ 

— 

keys to change the belt speed at any time. The right display will

show the current speed. 

8.

Press the 

Incline

keys to change the incline at any time. The left display will show

the current incline. 

9.

Press the 

Stop

key at any time.

Detailed Operation Guide

NOTE: 

Maximum user weight is 400 lbs. (181 kg).

1.

Plug the treadmill power cord into a power outlet from a grounded, dedicated circuit, rated
for one of the following: 115 VAC ±5%, 60 Hz and 20 amps; 208/220 VAC, 60 Hz, 15 amps
or 230 VAC ±5%, 50 Hz and 15 amps.

2.

Locate the on/off (I/O) power switch on the left side of the treadmill. Toggle it to the on 
(I) position to supply power to the internal treadmill components and illuminate the 
control panel.

Cybex Sport+ Treadmill Owner’s and Service Manual

Operation
Page 3-2

Содержание 515T









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды