Shenzhen Zhiyong Electronics Co., Ltd.
1
Preface
First of all, thank you for purchasing our products, the product specification is about the
function, usage, operation attention points, etc. Before use, please read the instructions
carefully and used correctly.
Manual annotation will use the following symbols to distinguish.
To avoid short out and deadly accident, the circuit under test should not surpass 600VAC
This probe is not designed for naked conductor.
Do not touch the conductor under test and the transducer probe during measuring.
When the oscilloscope is connected to other test terminal, please be careful for these
points:
Please use the fundamental insulation equipment with fitful voltage range and
pollution rate while the probe’s test terminal is connected to the other terminals.
Please do not surpass the safe voltage range if the fundamental insulation of the test
terminal cannot be met.
Please operating under correct guidance about electric safety.
There could be deadly electric shock if the device is damp or the users’ hand is wet.
Warning
Notice
Warning
=n
In the case of wrong operation, the user has the threat of injury, it records the
relevant matters needing attention to avoid such dangers.
The user may have suffered minor injuries and material damage while with the
wrong operation, to avoid such situation, note the matters needing attention.
This symbol means it has a harm to the machine and human body, you must
refer to manual operation.
Note
Recording of important notes while using the machine.
CYBERTEK
