Shenzhen Zhiyong Electronics Co., Ltd.
9
According to the value of the current under test, choose the correct range by pressing
button.
Attention: Different range correspond to different attenuation ratio of the oscilloscope.
Press the Auto Zero button . The buzzer will beep for twice, or it will have a long and
continuous beep meaning the failure of Auto Zero .The external magnetic field can have a
little influence to the DC zero, so do not move the device after Auto Zero.
Open the clamp of the probe and clamp the conductor under test.
Attention: There’s direction tip on the current probe clamp. If the direction of the current
fits the tip, output will be positive; On the contrary, the result is negative.
Adjust the vertical sensitivity of the oscilloscope to get a stable waveform.
5. Mechanic Characteristics
Size of the front current clamp
About 100*20*60mm
Size of the back output box
About 137*33*35mm
Operation altitude
0~2000 meter
Maximum diameter of the conductor
under test
12mm ø
Length of the cable connecting
current clamp and output box
1 meter
Length of double terminal BNC cable
1 meter
Weight
About 223g(without battery)
6. Environment characteristics
Operating temperature
0
℃～
+50
℃
Storing temperature
-20
℃～
+80
℃
Operating relative humidity
0
℃
to +40
℃，
95%RH
；
+40
℃
~+50
℃，
45%RH
Pollution Degree
Level 2
7. Maintenance
If the product is in the warranty period and used correctly, and at the same time
the malfunction is caused by the flaws of product itself and have not been
disassemble, the company will give free repair to the product.
CYBERTEK
