CyberPower Remote Management System
42
routerctrl
enable | disable
The IPv6 address is assigned through the method (Stateless
Address Autoconfiguration, Stateless DHCPv6 or Stateful
DHCPv6) which is decided by router setting.
manual
enable | disable
Enable or disable IPv6 manual ip.
ip
<manual IPv6 IP>
Set manual IPv6 ip.
Example 1:
To define IPv6 manual IP address then show the information of IPv6
CyberPower >
tcpip6 manualip 2001:cdba:0:0:0:0:3257:9652 show
Access: Enable
Router Control: Enable
Manual: Enable
Manual IPv6 Address: [2001:cdba::3257:9652]
snmpv1
Description: Show and configure status of SNMPv1.
Option
Argument
Description
show
Display SNMPv1 status for RMCARD
access
enable | disable
Enable or disable SNMPv1.
snmpv3
Description: Show and configure status of SNMPv3.
Option
Argument
Description
show
Display SNMPv3 status for RMCARD
access
enable | disable
Enable or disable SNMPv3
web
Description: Show and configure web access type, http port and https port.
Option
Argument
Description
show
Display all web information for RMCARD
access
http | https | disable
http
－
Enable the access to http service.
https
－
Enable the access to https service.
disable
－
Disable web service
httpport
<http port>
The TCP/IP port of the Hypertext Transfer Protocol
(HTTP) (80 by default)
httpsport
<https port>
The TCP/IP port of the Hypertext Transfer Protocol
Secure (HTTPS) (443 by default)
Example 1:
To change the HTTP server port to 5000
CyberPower >
web httpport 5000
