CyberPower CPSHB300ETR, Руководство пользователя

Страница: 10 / 36

2.4 Electrical Connection Warnings
2.5 Operation Warnings

Make all electrical connections (e.g. conductor termination, fuses, PE
connection, etc.) in accordance with prevailing regulations. When
working with the inverter powered on, adhere to all prevailing safety
regulations to minimize risk of accidents.

The unit may only be operated with PV generators (modules and
cabling) with protective insulation. Do not connect any source of energy
other than PV modules to the CPS hybrid inverter.

Systems with inverters typically require additional control (e.g.,
switches, disconnects) or protective devices (e.g., fusing circuit breakers)
depending upon the prevailing safety rules.

Please read this manual carefully, the manufacturer or supplier is not
responsible for damage caused by incorrect operation, installation,
wiring, transport, etc.
When energy flows into the house grid through the inverter, household
devices or lighting consume that energy. Leftover energy may be fed into the
public grid. If you choose this function and indeed there is left-over power
fed into the public grid, depending on your connection, the energy
consumption meter might be spinning backwards!

Ensure all covers and doors are closed and secure during operation.

Although designed to meet all safety requirements, some parts and
surfaces of Inverter are still hot during operation. To reduce the risk of
injury, do not touch the surfaces while Inverter is operating.

Incorrect sizing of the PV plant may result in voltages being present
which could destroy the inverter.

Anytime the inverter has been disconnected from the power network,
use extreme caution as some components can retain charge sufficient
to create a shock hazard; to minimize occurrence of such conditions,
comply with all corresponding safety symbols and markings present on
the unit and in this manual.

In special cases, there may still be interference for the specified
application area despite maintaining standardized emission limit values
(e.g. when sensitive equipment is located at the setup location or when
the setup location is near radio or television receivers).In this case, the
operator is obliged to take proper action to rectify the situation.
WARNING
!
CAUTION
!
WARNING
!
CAUTION
!
User Manual 4 Hybrid CPSHB300ETR