background image

INSTALLING YOUR UPS SYSTEM

 - continued

wall branch outlet is protected by a fuse or 

circuit breaker and does not service equip-

ment with large electrical demands (e.g. 

air conditioner, refrigerator, copier, etc.). 

The warranty prohibits the use of exten-

sion cords, outlet strips, and surge strips in 

conjunction with the UPS unit. 

4.  Press the power switch to turn the unit on. 

The Power On indicator light will illuminate 

and the unit will “beep”. If an overload is 

detected, an audible alarm will sound and 

the unit will emit one long beep. To correct 

this, turn the UPS off and unplug at least 

one piece of equipment from the battery 

power supplied outlets. Make sure the cir-

cuit breaker is depressed and then turn the 

UPS on.

5.  To maintain optimal battery charge, leave 

the UPS plugged into an AC outlet at  

all times.

6.  To store the UPS for an extended period 

of time, cover it and store with the battery 

fully charged. While in storage, recharge 

the battery every three months to ensure 

optimal battery life.

7.   Ensure the wall outlet and UPS are located 

near the equipment being attached for 

proper accessibility.

SYSTEM FUNCTION BLOCK DIAGRAM

 

 

EMI 

Filter 

Surge 

Suppressor

 

AVR 

Charger 

AC/DC 

Battery 

Inverter 

Input 

Output 

Normal Mode 
Battery Mode 

 

Advanced Energy-Saving Patented Bypass Technology

CyberPower’s patented GreenPower UPS™ with Bypass Technology reduces UPS 

energy costs by up to 75% compared to conventional UPS models. Even when utility 

power is normal, conventional UPS models constantly pass power through a transform-

er. By contrast, under normal conditions the advanced circuitry of a GreenPower UPS™ 

bypasses the transformer. As a result, the power efficiency is significantly increased 

while decreasing waste heat, using less energy, and reducing energy costs. When an 

abnormal power condition occurs, the GreenPower UPS™ automatically runs power 

through its transformer to regulate voltage and provide “safe” power. Since utility power is normal over 88% of 

the time, the GreenPower UPS™ operates primarily in its efficient bypass mode. The GreenPower UPS™ is also 

manufactured in accordance with the Restriction on Hazardous Substances (RoHS) directive making it one of 

the most environmentally-friendly on the market today.

CYBERPOWER GREENPOWER UPS™ TECHNOLOGY

G

REEN

P

OWER 

UPS

Energy-Saving Technology

Содержание AVR CP850PFCLCD











Отзывы: