CyberData Singlewire InformaCast Series, Руководство по эксплуатации

Страница: 54 / 91

Installing the Singlewire InformaCast® RGB (Multi-Color) Strobe
Singlewire InformaCast® RGB (Multi-Color) Strobe Setup
Operations Guide 931633A CyberData Corporation
46
2.3.10 Configure the Sensor Configuration Parameters
The door sensor (pins 5 and 6) on the header can be used to monitor a door's open or closed state.
There is an option on the
Sensor page to trigger on an open or short condition on these pins. The
door sensor alarm will be activated when the Door Open Timeout parameter has been met.
The intrusion sensor is an optical sensor installed on the Intercom board and will be activated when
the Intercom is removed from the case.
Each sensor can trigger up to four different actions:
• Activate the relay until the sensor is deactivated
• Call an extension and play a pre-recorded audio file
• Flash a strobe scene
Note Calling a preset extension can be set up as a point-to-point call, but currently can't send
delayed DTMF tones.
1. Click Sensor menu button to open the Sensor page ( Figure 2-24 ).
Figure 2-24. Sensor Configuration Page
Singlewire Multicolor Strobe