CyberData Singlewire InformaCast Series, Руководство по эксплуатации, Страница: 24 / 91

Installing the Singlewire InformaCast® RGB (Multi-Color) Strobe
Singlewire InformaCast® RGB (Multi-Color) Strobe Setup
Operations Guide 931633A CyberData Corporation
16
2.2.5 Restoring the Factory Default Settings
When troubleshooting configuration problems, it is sometimes convenient to restore the device to a
known state.
Note Each Singlewire InformaCast® RGB (Multi-Color) Strobe is delivered with factory set default
values.
To restore the factory default settings:
1. Press and hold the RTFM button (see SW1 in Figure 2-10 ) for more than five seconds.
Note The device will use DHCP to obtain the new IP address (DHCP-assigned address or default
to 10.10.10.10 if a DHCP server is not present).
Figure 2-10. RTFM Button (SW1)
RTFM button (SW1)