
Installing the Singlewire InformaCast® RGB (Multi-Color) Strobe
Singlewire InformaCast® RGB (Multi-Color) Strobe Setup
Operations Guide
931633A
CyberData Corporation
35
Note
For specific server configurations, go to the following website address:
https://www.cyberdata.net/pages/connecting-to-ip-pbx-servers
Color
Select desired color (only one may be chosen).
Brightness
How bright the strobe will blink when the Nightringer is ringing. This is the maximum
brightness for “fade” type scenes.
Red
The red LED value for Nightringer.
Green
The green LED value for Nightringer.
Blue
The blue LED value for Nightringer.
Use this button to preview the strobe flashing behavior for the
Nightringer Strobe
Settings
.
Call Disconnection
Terminate Call After Delay
Automatically terminate an active call after a given delay in seconds. A value of 0
will disable this function. Enter up to 8 digits.
Audio Codec Selection
Codec
Select the desired codec (only one may be chosen).
RTP Settings
RTP Port (even)
Specify the port number used for the RTP stream after establishing a SIP call. This
port number must be an even number and defaults to 10500. The supported range
is 0-65536. Enter up to 5 digits.
Jitter Buffer
Specify the size of the jitter buffer (in milliseconds) used for SIP calls. Valid values
are 50-1000.
Click the
Save
button to save your configuration settings.
Click on the
Reboot
button to reboot the system.
Click on the
Toggle Help
button to see a short description of some of the web page
items. First click on the
Toggle Help
button, and you will see a question mark (
)
appear next to some of the web page items. Move the mouse pointer to hover over a
question mark to see a short description of a specific web page item.
Table 2-11. SIP Configuration Parameters (continued)
Web Page Item
Description