Installing the VoIP Emergency Intercom
Parts List
Operations Guide
930279M
CyberData Corporation
64
2.5 Command Interface
Some functions on the Intercom can be activated using simple POST commands to the web interface.
The examples in
Table 2-19
use the free unix utility,
wget
, but any program that can send http POST
commands to the device should work.
Note
These commands require an authenticated session (a valid username and password to
work).
Table 2-19. Command Interface Post Commands
Device Action
HTTP Post Command
a
a.Type and enter all of each http POST command on one line.
To trigger the relay
(for the configured delay)
wget --user admin --password admin --post-data "test_relay=yes"
"http://10.0.3.78/cgi-bin/command.cgi" > /dev/null
To cause the Intercom to place a
call to extension
130
wget --user admin --password admin --post-data "call=130"
"http://10.0.3.78/cgi-bin/command.cgi" > /dev/null
To terminate an active call
wget --user admin --password admin --post-data "terminate=yes"
"http://10.0.3.78/cgi-bin/command.cgi" > /dev/null
To force the Intercom to reboot
wget --user admin --password admin --post-data "reboot=yes"
"http://10.0.3.78/cgi-bin/command.cgi" > /dev/null
To play the test audio file
wget --user admin --password admin --post-data "test_audio=yes"
"http://10.0.3.78/cgi-bin/command.cgi" > /dev/null
To cause the Intercom to speak
it's ip address
wget --user admin --password admin --post-data
"speak_ip_address=yes"
"http://10.0.3.78/cgi-bin/command.cgi" > /dev/null