
Installing the VoIP Emergency Intercom
Parts List
Operations Guide
930279M
CyberData Corporation
18
2.2.8 Restore the Factory Default Settings
When troubleshooting configuration problems, it is sometimes convenient to restore the device to a
known state. To restore the factory default settings on your device, do one of the following:
• If you have an Intercom that has an RTFM Switch, then see
Section 2.2.8.1, "Intercom with an
RTFM Switch"
.
• If you have an Intercom that has a jumper and does not have an RTFM switch, then see
Section
2.2.8.2, "Intercom with a Jumper"
.
Note
Each Intercom is delivered with factory set default values.
Note
The speaker will use DHCP to obtain the new IP address (DHCP-assigned address or
default to 10.10.10.10 if a DHCP server is not present).
2.2.8.1 Intercom with an RTFM Switch
Complete the following steps to restore defaults on an Intercom that has an RTFM switch:
1. Press and hold the RTFM switch (
Figure 2-15
) until the Intercom announces the IP address.
Figure 2-15. RTFM Switch