CyberData 10935, Руководство по эксплуатации, Страница: 64 / 94

Installing the VoIP Intercom
Intercom Setup
Operations Guide 930242A-D CyberData Corporation
58
2. On the Autoprovisioning Configuration page, you may enter values for the parameters
indicated in Table 2-17 .
Web Page Item Description
Autoprovisioning
Enable Autoprovisioning See Section 2.2.11.1, "Autoprovisioning" .
Get Autoprovisioning from DHCP See Section 2.2.11.1, "Autoprovisioning" .
Download Protocol Allows you to select whether the autoprovisioning file is acquired
via
TFTP or HTTP .
Autoprovisioning Server (IP Address) See Section 2.2.11.1, "Autoprovisioning" (15 character limit).
Autoprovisioning Filename Type the desired name for the autoprovisioning file.
Autoprovisioning Autoupdate

(in minutes)
Type the desired time (in minutes) that you want the
Autoprovisioning feature to update (6 character limit).
Note : A value of 0 will disable this option.
Autoprovision at time (HHMMSS) Type the desired time of day that you want the Autoprovisioning
feature to update (must be 6 characters).
Note : An empty value will disable this option.
Autoprovision when idle

(in minutes > 10)
Type the desired time (in minutes greater than 10) that you want
the Autoprovisioning feature to update after a certain amount of
idle time (6 character limit).
Note : A value of 0 will disable this option.
Clock
NTP Server Allows you to select the NTP server (64 character limit).
Posix Timezone String See Section 2.2.11.2, "Time Zone Strings" (43 character limit).
Set Time with External NTP Server on
boot When selected, the time is set with an external NTP server when
the device restarts.
Periodically update with time server When selected, the time is periodically updated with a time
server.
Time update period (in hours) Allows you to select the time updated period (in hours)

(4 character limit).
Allows you to set the time from the NTP server.
Current Time
Current Time (UTC) in 24 hour format
(
HHMMSS )
Allows you to input the current time in the 24 hour format.

(6 character limit)
Click on this button to set the clock after entering the current
time.
Click the Save button to save your configuration settings.
Note : You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.
3. After changing the parameters, click the Save button.
Table 2-17. Autoprovisioning Configuration Parameters