Installing the VoIP Intercom
Intercom Setup
Operations Guide
930242A-D
CyberData Corporation
15
2.1.4 Call Button and the Call Button LED
2.1.4.1 Calling with the The Call Button
•
You may initiate a call by pressing the Call button.
•
An active call is indicated by the Call Button LED blinking at one second intervals.
•
The intercom can automatically answer an incoming call.
•
You can press the call button to terminate an active call.
2.1.4.2 Call Button LED Function
•
Upon initial power or reset, the call button LED will illuminate.
•
While the software is setting up the network, the call button led will blink rapidly (10 times/
second).
•
When the software has finished initialization the Call Button LED will blink twice.
•
When a call is established (not just ringing), the Call Button LED will blink.
•
On the
Device Configuration Page
, there is an option called
Button Lit When Idle
. This option
sets the normal state for the call button led. The Call Button LED will still blink during
initialization and calls.
•
The Call Button LED will flash briefly at the beginning of RTFM mode.
Figure 2-5. Call Button and Call Button LED
Call Button and Call Button LED