Installing the VoIP Intercom
Intercom Setup
Operations Guide
930242A-D
CyberData Corporation
44
2. On the
Sensor Configuration
page, enter values for the parameters indicated in
Table 2-13
.
3. You must click on the
Save
button and then the
Reboot
button for the changes to take effect.
Table 2-13. Sensor Configuration Parameters
Web Page Item
Description
Door Sensor Settings
Door Sensor Normally Closed
Select the inactive state of the door sensors.
Door Open Timeout (in seconds)
Select the number of seconds that you want to pass before the
door sensor is activated.
Flash Button LED
Check this box to flash the LED until the sensor is deactivated
(roughly 10 times/second).
Activate Relay
Check this box to activate the relay until the sensor is deactivated.
Play Audio Locally
Check this box to loop an audio file out of the Intercom speaker
until the sensor is deactivated.
Make call to extension
Check this box to call a preset extension (once).
Play recorded audio
Check this box to play a pre-recorded audio file (once).
Dial Out Extension
Enter the desired dial-out extension number.
Dial Out ID
Type the desired Extension ID (64 character limit).
Use this button to test the door sensor.
Intrusion Sensor Settings
Flash Button LED
Check this box to flash the LED until the sensor is deactivated
(roughly 10 times/second).
Activate Relay
Check this box to activate the relay until the sensor is deactivated.
Play Audio Locally
Check this box to loop an audio file out of the Intercom speaker
until the sensor is deactivated.
Make call to extension
Check this box to call a preset extension (once).
Play recorded audio
Check this box to play a pre-recorded audio file (once).
Dial Out Extension
Enter the desired dial-out extension number.
Dial Out ID
Type the desired Extension ID (64 character limit).
Use this button to test the Intrusion sensor.
Click the
Save
button to save your configuration settings.
Note
: You need to reboot for changes to take effect.
Click on the
Reboot
button to reboot the system.