CyberData 010881, Руководство по эксплуатации

Страница: 22 / 38

CyberData Corporation 930109C VoIP Zone Controller 4-Port Audio Out Operations Guide
Implementing the VoIP Zone Controller
Configuring the VoIP Zone Controller
16
1. On the SIP Setup page, enter values for the parameters indicated in Table 2-4 .
1. Enter the IP address of the SIP Server .
2. Enter the port numbers used for SIP signaling:
a. Remote SIP Port
b. Local SIP Port
Table 2-4. SIP Setup Parameters
Web Page Item Description
SIP Server* Enter the SIP server represented as either a numeric IP
address in dotted decimal notation or the fully qualified
host name (FQHN) up to 64 characters.
Remote SIP Port* Enter the Remote SIP Port number (default is 5060).
Local SIP Port* Enter the Local SIP Port number (default is 5060).
SIP User ID* Enter the SIP User ID (up to 25 alphanumeric characters).
Authenticate ID* Enter the Authenticate ID (up to 25 alphanumeric
characters).
Authenticate Password* Enter the Authenticate Password (up to 25 alphanumeric
characters).
SIP Registration* Enable/Disable SIP Registration.
Unregister on Reboot* • Select Yes to automatically unregister the speaker when
it is rebooted.
• Select No to keep the speaker registered when it is
rebooted.
Register Expiration* Enter the SIP Registration lease time in minutes (default is
60 minutes).
Click on this button to save your configuration settings.
Changing a parameter that has an asterisk next to it will
cause a system reboot when saved.
Link to the Network Setup web page.
Link to the Admin Settings web page.
Link to the Zones Setup web page.
Link to the Upgrade Firmware web page.
Link to the Home page.