CyberData 010881, Руководство по эксплуатации

Страница: 18 / 38

CyberData Corporation 930109C VoIP Zone Controller 4-Port Audio Out Operations Guide
Implementing the VoIP Zone Controller
Configuring the VoIP Zone Controller
12
On this page:
1. Specify whether you use Static or DHCP IP Addressing by marking the appropriate radio
button. Then, if you select Static, go to Step 2 .
Note Changing the IP Addressing selection causes the system to reboot when click Save Settings.
2. For Static IP Addressing, also enter values for the following parameters:
a. The VoIP Zone Controller’s
IP Address
: The VoIP Zone Controller is delivered with a
factory default IP address. Change the default address to the correct IP address for your
system.
Note Changing the VoIP Zone Controller’s IP Address causes the system to reboot when you
click Save Settings.
b. The Subnet Mask.
c. The Default Gateway.
3. Click Save Settings when you finish.
Link to the Admin Settings web page.
Link to the SIP Setup web page.
Link to the Zones Setup web page.
Link to the Upgrade Firmware web page.
Link to the Home page.
Table 2-2. Network Setup Parameters (continued)
Web Page Item Description